X12 Release 5010
Delimiters: ~ Segment * Element > Component
Certified December 6, 2022
AAFES (Army and Air Force Exchange Service)

X12 856 Ship Notice/Manifest

This Draft Standard for Trial Use contains the format and establishes the data contents of the Ship Notice/Manifest Transaction Set (856) for use within the context of an Electronic Data Interchange (EDI) environment.

ISA
Interchange Control Header
Required
Max Use 1
To start and identify an interchange of zero or more functional groups and interchange-related control segments
ISA01
I01
Authorization Information Qualifier
Required
ID
Min 2 Max 2
Code identifying the type of information in the Authorization Information
ISA02
I02
Authorization Information
Required
alphanumeric (AN)
Min 10 Max 10
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
ISA03
I03
Security Information Qualifier
Required
ID
Min 2 Max 2
Code identifying the type of information in the Security Information
ISA04
I04
Security Information
Required
alphanumeric (AN)
Min 10 Max 10
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
ISA05
I05
Interchange ID Qualifier
Required
ID
Min 2 Max 2
Code indicating the system/method of code structure used to designate the sender or receiver ID element being qualified
ISA06
I06
Interchange Sender ID
Required
alphanumeric (AN)
Min 15 Max 15
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
ISA07
I05
Interchange ID Qualifier
Required
ID
Min 2 Max 2
Code indicating the system/method of code structure used to designate the sender or receiver ID element being qualified
ISA08
I07
Interchange Receiver ID
Required
alphanumeric (AN)
Min 15 Max 15
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
ISA09
I08
Interchange Date
Required
date (DT)
Min 6 Max 6
Date of the interchange
ISA10
I09
Interchange Time
Required
time (TM)
Min 4 Max 4
Time of the interchange
ISA11
I65
Repetition Separator
Required
undefined ()
Min 1 Max 1
Type is not applicable; the repetition separator is a delimiter and not a data element; this field provides the delimiter used to separate repeated occurrences of a simple data element or a composite data structure; this value must be different than the data element separator, component element separator, and the segment terminator
ISA12
I11
Interchange Control Version Number
Required
ID
Min 5 Max 5
Code specifying the version number of the interchange control segments
ISA13
I12
Interchange Control Number
Required
numeric (N0)
Min 9 Max 9
A control number assigned by the interchange sender
ISA14
I13
Acknowledgment Requested
Required
ID
Min 1 Max 1
Code indicating sender's request for an interchange acknowledgment
ISA15
I14
Interchange Usage Indicator
Required
ID
Min 1 Max 1
Code indicating whether data enclosed by this interchange envelope is test, production or information
ISA16
I15
Component Element Separator
Required
undefined ()
Min 1 Max 1
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
GS
Functional Group Header
Required
Max Use 1
To indicate the beginning of a functional group and to provide control information
GS01
479
Functional Identifier Code
Required
ID
Min 2 Max 2
Code identifying a group of application related transaction sets
GS02
142
Application Sender's Code
Required
alphanumeric (AN)
Min 2 Max 15
Code identifying party sending transmission; codes agreed to by trading partners
GS03
124
Application Receiver's Code
Required
alphanumeric (AN)
Min 2 Max 15
Code identifying party receiving transmission; codes agreed to by trading partners
GS04
373
Date
Required
longDate (DT)
Min 8 Max 8
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
GS05
337
Time
Required
time (TM)
Min 4 Max 8
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
GS06
28
Group Control Number
Required
numeric (N0)
Min 1 Max 9
Assigned number originated and maintained by the sender
GS07
455
Responsible Agency Code
Required
ID
Min 1 Max 2
Code identifying the issuer of the standard; this code is used in conjunction with Data Element 480
GS08
480
Version / Release / Industry Identifier Code
Required
alphanumeric (AN)
Min 1 Max 12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
ST
Transaction Set Header
Required
Max Use 1
To indicate the start of a transaction set and to assign a control number
ST01
143
Transaction Set Identifier Code
Required
ID
Min 3 Max 3
Code uniquely identifying a Transaction Set
856
Ship Notice/Manifest
ST02
329
Transaction Set Control Number
Required
alphanumeric (AN)
Min 4 Max 9
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
BSN
Beginning Segment for Ship Notice
Required
Max Use 1
To transmit identifying numbers, dates, and other basic data relating to the transaction set
Syntax Notes
If BSN07 is present, then and BSN06 is required.
BSN01
353
Transaction Set Purpose Code
Required
ID
Min 2 Max 2
Code identifying purpose of transaction set
00
Original
01
Cancellation
17
Cancel, to be Reissued
BSN02
396
Shipment Identification
Required
alphanumeric (AN)
Min 2 Max 30
A unique control number assigned by the original shipper to identify a specific shipment
BSN03
373
Date
Required
longDate (DT)
Min 8 Max 8
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
BSN04
337
Time
Required
time (TM)
Min 4 Max 8
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
BSN05
1005
Hierarchical Structure Code
Required
ID
Min 4 Max 4
Code indicating the hierarchical application structure of a transaction set that utilizes the HL segment to define the structure of the transaction set
0001
Shipment, Order, Packaging, Item
0002
Shipment, Order, Item, Packaging

HL loop

Required
Min Items
Max Loop 200000
HL
Hierarchical Level
Required
Max Use 1
To identify dependencies among and the content of hierarchically related groups of data segments
HL01
628
Hierarchical ID Number
Required
alphanumeric (AN)
Min 1 Max 12
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
HL02
734
Hierarchical Parent ID Number
Optional
alphanumeric (AN)
Min 1 Max 12
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
HL03
735
Hierarchical Level Code
Required
ID
Min 1 Max 2
Code defining the characteristic of a level in a hierarchical structure
S
Shipment
HL04
736
Hierarchical Child Code
Optional
ID
Min 1 Max 1
Code indicating if there are hierarchical child data segments subordinate to the level being described
HL
Hierarchical Level
Required
Max Use 1
To identify dependencies among and the content of hierarchically related groups of data segments
HL01
628
Hierarchical ID Number
Required
alphanumeric (AN)
Min 1 Max 12
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
HL02
734
Hierarchical Parent ID Number
Optional
alphanumeric (AN)
Min 1 Max 12
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
HL03
735
Hierarchical Level Code
Required
ID
Min 1 Max 2
Code defining the characteristic of a level in a hierarchical structure
I
Item
HL04
736
Hierarchical Child Code
Optional
ID
Min 1 Max 1
Code indicating if there are hierarchical child data segments subordinate to the level being described
HL
Hierarchical Level
Required
Max Use 1
To identify dependencies among and the content of hierarchically related groups of data segments
HL01
628
Hierarchical ID Number
Required
alphanumeric (AN)
Min 1 Max 12
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
HL02
734
Hierarchical Parent ID Number
Optional
alphanumeric (AN)
Min 1 Max 12
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
HL03
735
Hierarchical Level Code
Required
ID
Min 1 Max 2
Code defining the characteristic of a level in a hierarchical structure
P
Pack
HL04
736
Hierarchical Child Code
Optional
ID
Min 1 Max 1
Code indicating if there are hierarchical child data segments subordinate to the level being described
HL
Hierarchical Level
Required
Max Use 1
To identify dependencies among and the content of hierarchically related groups of data segments
HL01
628
Hierarchical ID Number
Required
alphanumeric (AN)
Min 1 Max 12
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
HL02
734
Hierarchical Parent ID Number
Optional
alphanumeric (AN)
Min 1 Max 12
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
HL03
735
Hierarchical Level Code
Required
ID
Min 1 Max 2
Code defining the characteristic of a level in a hierarchical structure
O
order
HL04
736
Hierarchical Child Code
Optional
ID
Min 1 Max 1
Code indicating if there are hierarchical child data segments subordinate to the level being described
HL
Hierarchical Level
Required
Max Use 1
To identify dependencies among and the content of hierarchically related groups of data segments
HL01
628
Hierarchical ID Number
Required
alphanumeric (AN)
Min 1 Max 12
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
HL02
734
Hierarchical Parent ID Number
Optional
alphanumeric (AN)
Min 1 Max 12
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
HL03
735
Hierarchical Level Code
Required
ID
Min 1 Max 2
Code defining the characteristic of a level in a hierarchical structure
T
Shipping Tare
HL04
736
Hierarchical Child Code
Optional
ID
Min 1 Max 1
Code indicating if there are hierarchical child data segments subordinate to the level being described
LIN
Item Identification
Required
Max Use 1
To specify basic item identification data
Syntax Notes
If any of LIN04 or LIN05 are present, then all are required.
If any of LIN06 or LIN07 are present, then all are required.
If any of LIN08 or LIN09 are present, then all are required.
If any of LIN10 or LIN11 are present, then all are required.
If any of LIN12 or LIN13 are present, then all are required.
If any of LIN14 or LIN15 are present, then all are required.
If any of LIN16 or LIN17 are present, then all are required.
If any of LIN18 or LIN19 are present, then all are required.
If any of LIN20 or LIN21 are present, then all are required.
If any of LIN22 or LIN23 are present, then all are required.
If any of LIN24 or LIN25 are present, then all are required.
If any of LIN26 or LIN27 are present, then all are required.
If any of LIN28 or LIN29 are present, then all are required.
If any of LIN30 or LIN31 are present, then all are required.
LIN01
350
Assigned Identification
Optional
alphanumeric (AN)
Min 1 Max 20
Alphanumeric characters assigned for differentiation within a transaction set
LIN02
235
Product/Service ID Qualifier
Required
ID
Min 2 Max 2
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
EN
EAN/UCC - 13
EO
EAN/UCC - 8
IB
International Standard Book Number (ISBN)
UA
U.P.C./EAN Case Code (2-5-5)
UK
GTIN 14-digit Data Structure
UP
UCC - 12
LIN03
234
Product/Service ID
Required
alphanumeric (AN)
Min 1 Max 48
Identifying number for a product or service
LIN04
235
Product/Service ID Qualifier
Optional
ID
Min 2 Max 2
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
LT
Lot Number
VA
Vendor's Style Number
VC
Vendor's (Seller's) Catalog Number
LIN05
234
Product/Service ID
Optional
alphanumeric (AN)
Min 1 Max 48
Identifying number for a product or service
SN1
Item Detail (Shipment)
Required
Max Use 1
To specify line-item detail relative to shipment
Syntax Notes
If any of SN105 or SN106 are present, then all are required.
SN102
382
Number of Units Shipped
Required
decimal (R)
Min 1 Max 10
Numeric value of units shipped in manufacturer's shipping units for a line item or transaction set
SN103
355
Unit or Basis for Measurement Code
Required
ID
Min 2 Max 2
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
PRF
Purchase Order Reference
Required
Max Use 1
To provide reference to a specific purchase order
PRF01
324
Purchase Order Number
Required
alphanumeric (AN)
Min 1 Max 22
Identifying number for Purchase Order assigned by the orderer/purchaser
PRF04
373
Date
Required
longDate (DT)
Min 8 Max 8
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
PO4
Item Physical Details
Optional
Max Use 1
To specify the physical qualities, packaging, weights, and dimensions relating to the item
Syntax Notes
If any of PO402 or PO403 are present, then all are required.
If PO405 is present, then and PO406 is required.
If any of PO406 or PO407 are present, then all are required.
If any of PO408 or PO409 are present, then all are required.
If PO410 is present, then and PO413 is required.
If PO411 is present, then and PO413 is required.
If PO412 is present, then and PO413 is required.
If PO413 is present, then at least one of PO410, PO411 or PO412 is required.
If PO417 is present, then and PO416 is required.
If PO418 is present, then and PO404 is required.
PO401
356
Pack
Required
numeric (N0)
Min 1 Max 6
The number of inner containers, or number of eaches if there are no inner containers, per outer container
PO402
357
Size
Optional
decimal (R)
Min 1 Max 8
Size of supplier units in pack
PO403
355
Unit or Basis for Measurement Code
Optional
ID
Min 2 Max 2
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
PO408
385
Gross Volume per Pack
Optional
decimal (R)
Min 1 Max 9
Numeric value of gross volume per pack
PO409
355
Unit or Basis for Measurement Code
Optional
ID
Min 2 Max 2
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
PID
Product/Item Description
Optional
Max Use 200
To describe a product or process in coded or free-form format
Syntax Notes
If PID04 is present, then and PID03 is required.
At least one of PID04 or PID05 is required.
If PID07 is present, then and PID03 is required.
If PID08 is present, then and PID04 is required.
If PID09 is present, then and PID05 is required.
PID01
349
Item Description Type
Required
ID
Min 1 Max 1
Code indicating the format of a description
F
Free-form
PID05
352
Description
Optional
alphanumeric (AN)
Min 1 Max 80
A free-form description to clarify the related data elements and their content
TD1
Carrier Details (Quantity and Weight)
Required
Max Use 20
To specify the transportation details relative to commodity, weight, and quantity
Syntax Notes
If TD101 is present, then and TD102 is required.
If TD103 is present, then and TD104 is required.
If TD106 is present, then and TD107 is required.
If any of TD107 or TD108 are present, then all are required.
If any of TD109 or TD110 are present, then all are required.
TD101
103
Packaging Code
Required
alphanumeric (AN)
Min 3 Max 5
Code identifying the type of packaging; Part 1: Packaging Form, Part 2: Packaging Material; if the Data Element is used, then Part 1 is always required
BAG
Bag
BOX
Box
CAS
Case
CTN
Carton
DRM
Drum
PCS
Pieces
PLT
Pallet
SKD
Skid
BAG67
Bag - Multiple-wall Paper (2 or more walls)
BAG72
Bag - Paper
BOX67
Box - Multiple-wall Paper (2 or more walls)
BOX25
Box - Corrugated or Solid
BOX72
Box - Paper VCI Water resistent
CAS25
Case - Corrugated or Solid
CAS58
Case - Metal
CAS67
Case - Multiple-wall Paper (2 or more walls)
CAS72
Case - Paper VCI Water resistent
CTN25
Carton - Corrugated or Solid
CTN58
Carton - Metal
DRM58
Drum - Metal
PLT03
Pallet - hard wood
PLT05
Pallet - soft wood
PLT94
Pallet - wood
SKD94
Skid - wood
SKD03
Skid - hard wood
SKD58
Skid - metal
TD102
80
Lading Quantity
Required
numeric (N0)
Min 1 Max 7
Number of units (pieces) of the lading commodity
TD106
187
Weight Qualifier
Required
ID
Min 1 Max 2
Code defining the type of weight
TD107
81
Weight
Required
decimal (R)
Min 1 Max 10
Numeric value of weight
TD108
355
Unit or Basis for Measurement Code
Required
ID
Min 2 Max 2
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
01
Actual Pounds
50
Actual Kilograms
LB
Pound
TD5
Carrier Details (Routing Sequence/Transit Time)
Required
Max Use 12
To specify the carrier and sequence of routing and provide transit time information
Syntax Notes
At least one of TD502, TD504, TD505, TD506 or TD512 is required.
If TD502 is present, then and TD503 is required.
If TD507 is present, then and TD508 is required.
If TD510 is present, then and TD511 is required.
If TD513 is present, then and TD512 is required.
If TD514 is present, then and TD513 is required.
If TD515 is present, then and TD512 is required.
TD501
133
Routing Sequence Code
Optional
ID
Min 1 Max 2
Code describing the relationship of a carrier to a specific shipment movement
TD502
66
Identification Code Qualifier
Optional
ID
Min 1 Max 2
Code designating the system/method of code structure used for Identification Code (67)
2
Standard Carrier Alpha Code (SCAC)
TD503
67
Identification Code
Optional
alphanumeric (AN)
Min 2 Max 80
Code identifying a party or other code
TD504
91
Transportation Method/Type Code
Required
ID
Min 1 Max 2
Code specifying the method or type of transportation for the shipment
A
Air
AP
Air (Package Carrier)
D
Parcel Post
H
Customer Pickup
J
Motor
K
Backhaul
LT
Less Than Trailer Load (LTL)
M
Motor (Common Carrier)
MP
Motor (Package Carrier)
O
Containerized Ocean
R
Rail
T
Best Way (Shippers Option)
U
Private Parcel Service
TD505
387
Routing
Required
alphanumeric (AN)
Min 1 Max 35
Free-form description of the routing or requested routing for shipment, or the originating carrier's identity
TD506
368
Shipment/Order Status Code
Optional
ID
Min 2 Max 2
Code indicating the status of an order or shipment or the disposition of any difference between the quantity ordered and the quantity shipped for a line item or transaction
TD510
732
Transit Time Direction Qualifier
Optional
ID
Min 2 Max 2
Code specifying the value of time used to measure the transit time
CD
Calendar Days (Includes weekends and Holidays)
TD511
733
Transit Time
Optional
decimal (R)
Min 1 Max 4
The numeric amount of transit time
TD3 loop
Required
Max Loop 1
TD3
Carrier Details (Equipment)
Required
Max Use 1
To specify transportation details relating to the equipment used by the carrier
Syntax Notes
oneOrNone
If TD302 is present, then and TD303 is required.
If TD304 is present, then and TD305 is required.
If any of TD305 or TD306 are present, then all are required.
TD301
40
Equipment Description Code
Required
ID
Min 2 Max 2
Code identifying type of equipment used for shipment
TD303
207
Equipment Number
Required
alphanumeric (AN)
Min 1 Max 15
Sequencing or serial part of an equipment unit's identifying number (pure numeric form for equipment number is preferred)
REF
Reference Information
Required
To specify identifying information
Syntax Notes
At least one of REF02 or REF03 is required.
REF01
128
Reference Identification Qualifier
Required
ID
Min 2 Max 3
Code qualifying the Reference Identification
BM
Bill of Lading Number
CN
Carrier's Reference Number (PRO/Invoice)
REF02
127
Reference Identification
Required
alphanumeric (AN)
Min 1 Max 50
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
MAN
Marks and Numbers Information
Required
To indicate identifying marks and numbers for shipping containers
Syntax Notes
If any of MAN04 or MAN05 are present, then all are required.
If MAN06 is present, then and MAN05 is required.
MAN01
88
Marks and Numbers Qualifier
Required
ID
Min 1 Max 2
Code specifying the application or source of Marks and Numbers (87)
GM
EAN.UCC Serial Shipping Container Code (SSCC) and Application Identifier
UC
U.P.C. Shipping Container Code
MAN02
87
Marks and Numbers
Required
alphanumeric (AN)
Min 1 Max 48
Marks and numbers used to identify a shipment or parts of a shipment
MAN
Marks and Numbers Information
Required
To indicate identifying marks and numbers for shipping containers
Syntax Notes
If any of MAN04 or MAN05 are present, then all are required.
If MAN06 is present, then and MAN05 is required.
MAN01
88
Marks and Numbers Qualifier
Required
ID
Min 1 Max 2
Code specifying the application or source of Marks and Numbers (87)
GM
EAN.UCC Serial Shipping Container Code (SSCC) and Application Identifier
MAN02
87
Marks and Numbers
Required
alphanumeric (AN)
Min 1 Max 48
Marks and numbers used to identify a shipment or parts of a shipment
DTM
Date/Time Reference
Required
Max Use 10
To specify pertinent dates and times
Syntax Notes
At least one of DTM02, DTM03 or DTM05 is required.
If DTM04 is present, then and DTM03 is required.
If any of DTM05 or DTM06 are present, then all are required.
DTM01
374
Date/Time Qualifier
Required
ID
Min 3 Max 3
Code specifying type of date or time, or both date and time
011
Shipped
067
Current Schedule Delivery
DTM02
373
Date
Required
longDate (DT)
Min 8 Max 8
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
FOB
F.O.B. Related Instructions
Required
Max Use 1
To specify transportation instructions relating to shipment
Syntax Notes
If FOB03 is present, then and FOB02 is required.
If FOB04 is present, then and FOB05 is required.
If FOB07 is present, then and FOB06 is required.
If FOB08 is present, then and FOB09 is required.
FOB01
146
Shipment Method of Payment
Required
ID
Min 2 Max 2
Code identifying payment terms for transportation charges
BP
Paid by Buyer
CC
Collect
DE
Per Contract
PB
Customer Pickup/Backhaul
PC
Prepaid but Charged to Customer
PP
Prepaid (by Seller)
PS
Paid by Seller
N1 loop
Required
Max Loop 200
N1
Party Identification
Required
Max Use 1
To identify a party by type of organization, name, and code
Syntax Notes
At least one of N102 or N103 is required.
If any of N103 or N104 are present, then all are required.
N101
98
Entity Identifier Code
Required
ID
Min 2 Max 3
Code identifying an organizational entity, a physical location, property or an individual
SF
Ship From
N102
93
Name
Required
alphanumeric (AN)
Min 1 Max 60
Free-form name
N103
66
Identification Code Qualifier
Required
ID
Min 1 Max 2
Code designating the system/method of code structure used for Identification Code (67)
1
D-U-N-S Number, Dun & Bradstreet
9
D-U-N-S+4, D-U-N-S Number with Four Character Suffix
UL
Global Location Number (GLN)
N104
67
Identification Code
Required
alphanumeric (AN)
Min 2 Max 80
Code identifying a party or other code
REF
Reference Information
Required
To specify identifying information
Syntax Notes
At least one of REF02 or REF03 is required.
FOB
F.O.B. Related Instructions
Required
Max Use 1
To specify transportation instructions relating to shipment
Syntax Notes
If FOB03 is present, then and FOB02 is required.
If FOB04 is present, then and FOB05 is required.
If FOB07 is present, then and FOB06 is required.
If FOB08 is present, then and FOB09 is required.
N1 loop
Required
Max Loop 200
N1
Party Identification
Required
Max Use 1
To identify a party by type of organization, name, and code
Syntax Notes
At least one of N102 or N103 is required.
If any of N103 or N104 are present, then all are required.
N101
98
Entity Identifier Code
Required
ID
Min 2 Max 3
Code identifying an organizational entity, a physical location, property or an individual
SF
Ship From
N102
93
Name
Required
alphanumeric (AN)
Min 1 Max 60
Free-form name
N103
66
Identification Code Qualifier
Required
ID
Min 1 Max 2
Code designating the system/method of code structure used for Identification Code (67)
1
D-U-N-S Number, Dun & Bradstreet
9
D-U-N-S+4, D-U-N-S Number with Four Character Suffix
UL
Global Location Number (GLN)
N104
67
Identification Code
Required
alphanumeric (AN)
Min 2 Max 80
Code identifying a party or other code
REF
Reference Information
Optional
Min 1 Max 1
To specify identifying information
FOB
F.O.B. Related Instructions
Optional
Min 1 Max 1
To specify transportation instructions relating to shipment
N1 loop
Required
Max Loop 200
N1
Party Identification
Required
Max Use 1
To identify a party by type of organization, name, and code
Syntax Notes
At least one of N102 or N103 is required.
If any of N103 or N104 are present, then all are required.
REF
Reference Information
Optional
Min 1 Max 1
To specify identifying information
FOB
F.O.B. Related Instructions
Optional
Min 1 Max 1
To specify transportation instructions relating to shipment
CTT
Transaction Totals
Required
Max Use 1
To transmit a hash total for a specific element in the transaction set
Syntax Notes
If any of CTT03 or CTT04 are present, then all are required.
If any of CTT05 or CTT06 are present, then all are required.
CTT01
354
Number of Line Items
Required
numeric (N0)
Min 1 Max 6
Total number of line items in the transaction set
SE
Transaction Set Trailer
Required
Max Use 1
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
SE01
96
Number of Included Segments
Required
numeric (N0)
Min 1 Max 10
Total number of segments included in a transaction set including ST and SE segments
SE02
329
Transaction Set Control Number
Required
alphanumeric (AN)
Min 4 Max 9
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set

Schedule a Demo

Schedule a Demo

BOOK A DEMO